MX120 Audio Video Processor Specifications
FREQUENCY RESPONSE STEREO MODE
LEFT and RIGHT FRONT channels, +0, -0.5dB from 20Hz to 20kHz
DOLBY PRO-LOGIC IIx MODE AND MUSIC MODES
LEFT, CENTER and RIGHT FRONT, LEFT and RIGHT SURROUND and BACK channels, +0, -0.5dB from 20Hz to 20kHz If small speakers are programmed, the above channels employ high pass filters with a corner frequency of 80Hz and a 1dB per octave roll-off.
DD, DTS, AND 8 CHANNEL EXTERNAL INPUT
All Channels, +0, -0.5dB from 20Hz to 20kHz
SUBWOOFER
Low Pass filtered with an 80Hz corner frequency and 24dB per octave roll off in all modes except external.
RATED OUTPUT
2V from all outputs
OUTPUT IMPEDANCE
Less than 600 Ohms all outputs
MAXIMUM OUTPUT
8V from all outputs
TOTAL HARMONIC DISTORTION
All Channels, 0.005% from 20Hz to 20kHz
VOLTAGE GAIN
High Level to Tape Output: 0dB
High Level to Preamp Output: 14dBPhono to Preamp Output: 54dB
INPUT SENSITIVITY
Line Level: 100mV for 500mV output
Phono: 1mV for 500mV output
Dolby Level: 200mV
External processor reference level: 200mV
SIGNAL-TO-NOISE RATIO
98dB below rated output
MAXIMUM INPUT SIGNAL
High Level: 6V
INPUT IMPEDANCE
High Level: 20K Ohms; Phono: 47K Ohms
TONE CONTROLS
Bass and Treble variable 12dB boost to 12dB cut
POWER REQUIREMENTS
110V, 110V, 120V, 220V, 230V, 240V all 50/60Hz, 65 watts
OVERALL DIMENSIONS (H w W x D)
7-5/8” (19.63cm) x 17-1/2” (44.5cm) x 18-3/4”
(47.63cm)
WEIGHT
27 lbs. (12.25kg) net; 46 lbs. (20.9kg) shipping
For the Consumer's Protection
In order to ensure the highest level of customer satisfaction, "new" McIntosh products may only be purchased over-the-counter or delivered and installed by an Authorized McIntosh Dealer.
McIntosh products that are purchased over the Internet, by phone or mail order are presumed to be "used" and do not qualify for any McIntosh Warranty. McIntosh does not warrant, in any way, products that are purchased from anyone who is not an Authorized Dealer or products that have had their serial number altered or defaced.
