MX150
A/V Control Center
The new MX150 12-channel, 2-zone Audio Video Preamplifier from McIntosh is designed to command the most advanced home theater installations with a potent suite of features including multiple subwoofer configurations, an electronic crossover function and on-board RoomPerfectTM* processing. No less than 5 HDMI 1.3 audio/video inputs work with the latest audio processing to insure seamless compatibility with BluRay disc players. The MX150 is ready to decode Dolby* TrueHD, DTS-HD Master Audio and multi-channel PCM (via HDMI) in addition to Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Digital 5.1, Dolby Digital EX, Dolby Digital Plus, DTS 5.1, DTS ES, Discrete 6.1, DTS ES Matrix 6.1, DTS Neo:6, DTS 96/24. Five Component, two S-Video and two Composite video inputs guarantee room to grow and user preferences are assignable per source.
* ROOMPERFECT is a registered trademark and the ROOMPERFECT logo is a trademark of Lyngdorf Audio A/S.
DTS is a registered trademark & the DTS logos and Symbol are trademarks of DTS, Inc.
* Dolby and the Double-D symbol are registered trademarks of Dolby Laboratories.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks of registered trademarks of HDMI Licensing LLC.
MX150 Features
Four user-assignable outputs allow multiple subwoofer, surround or center-channel configurations.
Independent, user-selectable crossover point, slope and filter settings per loudspeaker.
System set-up and RoomPerfectTM configurations may be stored via USB drive or CompactFlash.
MX150 Specifications
AUDIO SPECIFICATIONS
The MX150 Specifications listed here were taken with RoomPerfectTM set to Bypass Mode and Voicing Mode set to Neutral.
FREQUENCY RESPONSE
Left, Center, Right, Left Surround, Right Surround, Left Back Surround, Right Back Surround: + 0.5dB from 20Hz-20,000Hz
Subwoofer: + 0.5dB from 20Hz-800Hz Adjustable
TOTAL HARMONIC DISTORTION
0.005% maximum from 20Hz to 20,000Hz at rated output
SIGNAL TO NOISE RATIO (A Weighted)
Phono: 86dB below 10mV input High Level: 96dB below rated output
RATED OUTPUT VOLTAGE
2.5V Unbalanced Main Outputs 5.0V Balanced Main Outputs
MAXIMUM VOLTAGE OUTPUT
6.5V Unbalanced (8.5V Subwoofer)
13V Balanced (17V Subwoofer)
OUTPUT IMPEDANCE
75 ohms Unbalanced
100 ohms Balanced
INPUT IMPEDANCE
Phono: 47k Ohms, 65pf
High Level: 10k Ohms Unbalanced and Balanced
SENSITIVITY FOR RATED OUTPUT
Phono: 5mV
High Level: 500mV Unbalanced
1V Balanced
MAXIMUM INPUT SIGNAL
Phono: 50mV
High Level: 4.5V Unbalanced and Balanced
VOLTAGE GAIN
Phono to Main Output: 54dB
High Level to Main Output: 14dB
GENERAL SPECIFICATIONS
POWER REQUIREMENTS
100 Volts, 50/60Hz at 75 watts
110 Volts, 50/60Hz at 75 watts
120 Volts, 50/60Hz at 75 watts
220 Volts, 50/60Hz at 75 watts
230 Volts, 50/60Hz at 75 watts
240 Volts, 50/60Hz at 75 watts
Standby: Less than 0.5 watts
Note: Refer to the rear panel of the MX150 for the correct voltage.
OVERALL DIMENSIONS
Width is 17-1/2 inches (44.45cm)
Height is 7-5/8 inches (19.38cm) including feet
Depth is 18 inches (45.72cm) including the front panel, knobs and cables.
SHIPPING CARTON DIMENSIONS
Width is 28 inches (71.12cm)
Depth is 24-1/2 inches (62.23cm)
Height is 18 inches (45.72cm)
WEIGHT
30.5 lbs. (13.83 kg) net, 60.5 lbs. (27.44 kg) in shipping carton.
Product Details: Reviews and Awards
For the consumer's protection
In order to ensure the highest level of customer satisfaction, "new" McIntosh products may only be purchased over-the-counter or delivered and installed by an Authorized McIntosh Dealer.
McIntosh products that are purchased over the Internet, by phone or mail order are presumed to be "used" and do not qualify for any McIntosh Warranty. McIntosh does not warrant, in any way, products that are purchased from anyone who is not an Authorized Dealer or products that have had their serial number altered or defaced.
