Each pair of channels can be set in bridged configuration for 200 watts output into 4 ohm loudspeakers with less than 0.01% distortion.
MCC204 Power Amplifier Features
High Current Output
The one band equalizer has a center frequency that is variable from 40 Hz to 2,000 Hz which can be either cut or boosted ±12db. 12dB per octave high pass filters with variable corner frequencies from 50Hz to 120Hz and 12dB per octave low pass filters with variable corner frequencies from 50Hz to 120Hz. Power Guard and Sentry Monitor
All channels include the patented McIntosh Power Guard circuit that prevents the amplifier from being overdriven into clipping with its harsh distorted sound that can also damage your valuable loudspeakers. McIntosh Sentry Monitor power output stage protection circuits are present on all channels to ensure the MCC204 will have a long and trouble free operating life.
Speaker Protection
If for any reason, a DC (Direct Current) voltage appears at the speaker output terminals, a built-in circuit turns off the amplifier power supplies to prevent damage to your valuable loudspeakers.
Thermal Protection with Multi-Speed Cooling Fan
The MCC204 has a fully complimentary double balanced amplifier design and is identical to that found in McIntosh’s leading home amplifiers. Balanced Inputs with Pass Through
The Balanced Inputs cancel out interference noise that is produced by other sources in the vehicle and can be directly connected to the bridged speaker output of any head unit. The MCC204 provides four line level outputs, for the convenience of connecting multi-amplifier systems. Remote Subwoofer Control and Line Output
The subwoofer level can be controlled via an external rotary control, which can be remotely mounted in the vehicle. A line level summed output is provided to drive an external subwoofer power amplifier. The inputs to both channels are summed for this output. Gold Plated Terminals
McIntosh provides gold plated input and output terminals on the amplifiers for superior corrosion resistance. It is a very important feature in the automotive environment. Speaker wires to 10 AWG and DC input wires to 4 AWG can be accommodated.
MCC204 Power Amplifier Specifications
Power Output Per Channel
Power Output Bridged
Rated Power Band
Total Harmonic Distortion
Dymanic Headroom
Frequency Response
+0, -3dB from 10Hz to 100,000Hz
Sensitivity
A-Weighted Signal To Noise Ratio
One Band Equalizer
Crossover
Subwoofer Output
Intermodulation Distortion
0.005% for 4 ohm loads
0.01% for 2 ohm loads
0.01% for Bridged Mode with 4 ohm loads
Input Impedance
Power Requirements
Dimensions
Weight
MCC204 Amplifier Owner's Manual and Literature
Manuals & Documents
MCC204 Power Amplifier Owner's Manual (7910.00KB)Downloads & Updates
MCC204 Power Amplifier Literature (254.73KB)Product Details: Reviews and Awards
For the Consumer's Protection
In order to ensure the highest level of customer satisfaction, "new" McIntosh products may only be purchased over-the-counter or delivered and installed by an Authorized McIntosh Dealer.
McIntosh products that are purchased over the Internet, by phone or mail order are presumed to be "used" and do not qualify for any McIntosh Warranty. McIntosh does not warrant, in any way, products that are purchased from anyone who is not an Authorized Dealer or products that have had their serial number altered or defaced.
