MA6500 Integrated Amplifier Specifications
FREQUENCY RESPONSE: 20Hz to 20kHz, +0 / -0.5dB
TOTAL HARMONIC DISTORTION
0.005% max. at any level from 250 milliwatts to rated power output per channel from 20Hz to 20kHz.
INTERMODULATION DISTORTION
SMPTE 0.005% maximum if instantaneous peak output does not exceed 400W per channel
POWER OUTPUT
200, 120 watts minimum sine wave continuous average power output per channel, both channels operating, into a load impedance of 4, and 8 ohms respectively.
A-WEIGHTED SIGNAL-TO-NOISE RATIO
Power amp: 110dB below rated output
High level: 100dB below rated output (90dB IHF)
Phono: 90dB below 10 mV input (84dB IHF)
INPUT IMPEDANCE:
High level: 22k ohms
Phono: 47k ohms, 65pf
Main in: 20k ohms
OUTPUT LOAD IMPEDANCE: 4 or 8 ohms
INPUT SENSITIVITY
High level: 250mV for 2.5V rated output (50mV IHF)
Phono: 2.5mV for 2.5V rated output (o.5mV IHF)
Main in: 2.5V for rated output
DAMPING FACTOR :230 (8 ohms), 120 (4 ohms)
RATED POWER BAND: 20Hz to 20kHz
DYNAMIC HEADROOM: 2.4dB
MAXIMUM PREAMP VOLTAGE OUTPUT: 8V from 20Hz to 20kHz
MAXIMUM INPUT SIGNAL: High level: 8V; Phono: 90mV
VOLTAGE GAIN : High level to tape: 0dB; High level to main: 20dB
TONE CONTROLS: Bass and treble: + 12dB
POWER GUARD: Clipping is prevented and THD does not exceed 2% with up to14dB overdrive at 1kHz
POWER REQUIREMENTS: 120V 50/60Hz, 4A
DIMENSIONS (H X W X D): inch: 71⁄16" x 171⁄2" x 181⁄8" cm: 17.9 x 44.5 x 46 includes clearance for connectors knob clearance: 11⁄8" (2.9 cm)
FREQUENCY RESPONSE
20Hz to 20kHz, +0 / -0.5dB
TOTAL HARMONIC DISTORTION
0.005% max. at any level from 250 milliwatts to rated power output per channel from 20Hz to 20kHz.
INTERMODULATION DISTORTION
SMPTE 0.005% maximum if instantaneous peak output does not exceed 400W per channel
POWER OUTPUT
200, 120 watts minimum sine wave continuous average power output per channel, both channels operating, into a load impedance of 4, and 8 ohms respectively.
A-WEIGHTED SIGNAL-TO-NOISE RATIO
Power amp: 110dB below rated output
High level: 100dB below rated output (90dB IHF)
Phono: 90dB below 10 mV input (84dB IHF)
INPUT IMPEDANCE
High level: 22k ohms
Phono: 47k ohms, 65pf
Main in: 20k ohms
OUTPUT LOAD IMPEDANCE: 4 or 8 ohms
INPUT SENSITIVITY
High level: 250mV for 2.5V rated output (50mV IHF)
Phono: 2.5mV for 2.5V rated output (o.5mV IHF)
Main in: 2.5V for rated output
DAMPING FACTOR :230 (8 ohms), 120 (4 ohms)
RATED POWER BAND: 20Hz to 20kHz
DYNAMIC HEADROOM: 2.4dB
MAXIMUM PREAMP VOLTAGE OUTPUT: 8V from 20Hz to 20kHz
MAXIMUM INPUT SIGNAL: High level: 8V; Phono: 90mV
VOLTAGE GAIN : High level to tape: 0dB; High level to main: 20dB
TONE CONTROLS: Bass and treble: + 12dB
POWER GUARD: Clipping is prevented and THD does not exceed 2% with up to14dB overdrive at 1kHz
POWER REQUIREMENTS: 120V 50/60Hz, 4A
DIMENSIONS (H X W X D): inch: 71⁄16" x 171⁄2" x 181⁄8" cm: 17.9 x 44.5 x 46 includes clearance for connectors
knob clearance: 11⁄8" (2.9 cm)
WEIGHT: 74.5 pounds (33.8 Kg) net, 92.5 pounds (41.7 Kg) in shipping
carton
