Product Details: Features
POWER ASSURANCE SYSTEM
A collection of technologies that enhance performance and reliability while protecting the amplifier and loudspeakers.
POWER GUARD®
A waveform comparison circuit continuously monitors both input and output signals. Power Guard dynamically adjusts the input level to avoid clipping while preventing harsh sounding distortion.
SENTRY MONITOR®
Fuse-less short-circuit protection circuit disengages the output stage
before current exceeds safe operating level – resets automatically.
DYNAMIC POWER MANAGER (DPM)™
By matching the characteristics of the output stage to 4 or 8 Ohm loudspeakers
DPM insures the most efficient power transfer, reduces distortion, and promotes cool operation; with DPM you get all the power you paid for.
WATTMETER
Swift, accurate response reveals program peaks so staying within the power limits of your loudspeakers is easy.
Product Details: Specifications
POWER OUTPUT
200 Watts into 4 ohm or 8 ohm loads minimum sine wave continuous average power output per channel with all channels operating. The output RMS voltage is 40.0 across 8 ohms and 28.3 across 4 ohms.
OUTPUT LOAD IMPEDANCE
8 or 4 ohms
RATED POWER BAND
20Hz to 20kHz
TOTAL HARMONIC DISTORTION
0.005% maximum harmonic distortion at any power level from 250 milliwatts to rated power per channel from 20Hz to 20kHz, all channels operating.
DYNAMIC HEADROOM
1.7dB
FREQUENCY RESPONSE
+0, -0.25dB from 20Hz to 20kHz
+0, -3.0dB from 10Hz to 100kHz
INPUT SENSITIVITY
8 Ohms: 1.4 volt unbalanced; 2.8 volts balanced
4 Ohms: 1 volt unbalanced; 2 volts balanced
SIGNAL-TO-NOISE RATIO (A-WEIGHTED)
112dB below rated output
INTERMODULATION DISTORTION
Maximum intermodulation distortion if instantaneous peak output per channel does not exceed twice the rated output, for any combination of frequencies from 20Hz to 20kHz, with all channels operating is 0.005% for 4 or 8 ohm loads.
INPUT IMPEDANCE
10,000 ohms unbalanced 20,000 ohms balanced
WIDE BAND DAMPING FACTOR
8 ohms; grate than 140, 4 ohms; greater than 70
POWER REQUIREMENTS
100 volts, 50/60Hz, 12 amps
110 volts, 50/60Hz, 11 amps
120 volts, 50/60Hz, 10 amps
220 volts 50/60Hz, 6 amps
230 volts, 50/60Hz, 6 amps
240 volts, 50/60Hz, 6 amps
DIMENSIONS (INCLUDING CLEARANCE
FOR CONNECTORS) H X W X D
9-7/16” (24cm) x 17-1/2” (44.5cm) x 21” (53.3cm)
WEIGHT
81 lbs. (44.1 kg) net
114 lbs. (51.8 kg) in shipping carton
For the Consumer's Protection
In order to ensure the highest level of customer satisfaction, "new" McIntosh products may only be purchased over-the-counter or delivered and installed by an Authorized McIntosh Dealer.
McIntosh products that are purchased over the Internet, by phone or mail order are presumed to be "used" and do not qualify for any McIntosh Warranty. McIntosh does not warrant, in any way, products that are purchased from anyone who is not an Authorized Dealer or products that have had their serial number altered or defaced.
