MC207 Power Amplifier Features
EXCLUSIVE MCINTOSH POWER ASSURANCE SYSTEM
A collection of technologies that enhance performance and reliability
while protecting the amplifier and loudspeakers.
POWER GUARD®
A waveform comparison circuit continuously monitors both input and
output signals. Power Guard dynamically adjusts the input level to avoid clipping
while preventing harsh sounding distortion.
SENTRY MONITOR®
Fuse-less short-circuit protection circuit disengages the output stage
before current exceeds safe operating level – resets automatically.
DYNAMIC POWER MANAGER (DPM)™
By matching the characteristics of the output stage to 4 or 8 Ohm loudspeakers
DPM insures the most efficient power transfer, reduces distortion, and promotes
cool operation; with DPM you get all the power you paid for.
WATTMETER
Swift, accurate response reveals program peaks so staying within the power limits of your loudspeakers is easy.
- Seven 200 Watt Channels
- Two-Zone Operation
- McIntosh Glass Panel with
- Fiber-Optic Illuminated Nomenclature
- Soft-Start In-Rush Current Protection
- Oversized, Cool-Running Power
- Supply
- Remote Power Control Trigger
- Multi-Way Speaker Binding Posts
- Balanced XLR and Unbalanced RCA
- Gold Plated Input Jacks
MC207 Power Amplifier Specifications
POWER OUTPUT
Minimum Sine wave continuous average power output per channel, all channels operating is 200 watts into a 4 ohm or 8 ohm load.
RATED POWER BAND
20Hz to 20kHz
TOTAL HARMONIC DISTORTION
Maximum total harmonic distortion at any power level from 250 milliwatts to rated power output is 0.005% for 4 or 8 ohm loads.
DYNAMIC HEADROOM
1.7dB
FREQUENCY RESPONSE
+0, -0.25dB from 20Hz to 20kHz
+0, -3dB from 10Hz to 100kHz
SENSITIVITY
1.0 Volt balanced with a 4 ohm speaker
2.0 Volt unbalanced with a 4 ohm speaker
1.4 Volt balanced with a 8 ohm speaker
2.8 Volt unbalanced with a 8 ohm speaker
A-WEIGHTED SIGNAL-TO-NOISE RATIO
89dB (112dB below rated output)
INTERMODULATION DISTORTION
Maximum intermodulation distortion if instantaneous peak output per channel does not exceed twice the rated output, for any combination of frequencies from 20Hz to 20kHz, with all channels operating is 0.005% for 4 or 8 ohm loads.
INPUT IMPEDANCE
20,000 ohms balanced
10,000 ohms unbalanced
WIDE BAND DAMPING FACTOR
Greater than 60 at 4 ohms
Greater than 140 at 8 ohms
POWER REQUIREMENTS
100 Volts, 50/60Hz, 14.4 amps
110 Volts, 50/60Hz, 13.0 amps
120 Volts, 50/60Hz, 12.0 amps
220 Volts, 50/60Hz, 6.0 amps
230 Volts, 50/60Hz, 6.0 amps
240 Volts, 50/60Hz, 6.0 amps
OVERALL DIMENSIONS (H x W x D)
9-7/16” (24cm) x 17-1/2” (44.5cm) x 18-3/4” (48cm)
WEIGHT
83 lbs. (37.6kg) net
116 lbs. (52.6kg) in shipping carton.
For the Consumer's Protection
In order to ensure the highest level of customer satisfaction, "new" McIntosh products may only be purchased over-the-counter or delivered and installed by an Authorized McIntosh Dealer.
McIntosh products that are purchased over the Internet, by phone or mail order are presumed to be "used" and do not qualify for any McIntosh Warranty. McIntosh does not warrant, in any way, products that are purchased from anyone who is not an Authorized Dealer or products that have had their serial number altered or defaced.
