MT10 Turntable Features
Ready To Play
Tracking force, anti-skate and cartridge position are all preset. The MT-10 is ready to use just moments after unpacking.
Matched Tone Arm and Cartridge
The MT10 tone arm features a specially dampened Dural-Aluminium armtube. The light weight and rigidity of the tone arm is an ideal mate for the custom, medium-weight moving coil cartridge.
Massive Platter
The platter is CNC machined from a special silicone acrylic material to a weight of twelve pounds and a thickness of two and one-half inches for near immunity to bass-robbing resonances.
Magnetic Air Damped Bearing
The MT10 Turntable Platter rotates on a special magnetic bearing; literally suspended on a cushion of air for near friction-free performance.
- Precision Motor and Drive Electronics
- Illuminated Speed Meter
- Multi-Layered Damped Chassis Power Control
- Fiber-Optic Illuminated Glass Front Panel
- Super Mirror Chassis Finish
MT10 Turntable Specifications
MCC10 Cartridge Specifications
Output Level
0.5 mV at 5 cm/s
Load Impedance
Greater than 200 ohms, 500 ohms recommended
Frequency Response
20Hz to 50,000Hz
Compliance
6 x 10-6 cm/dyne
Recommended Tracking Force
2.4 g
Channel Difference
Less than 0.3 dB
Total Mass
11 g
Stylus
Elliptical Diamond
Cantilever Material
Aluminum
Body
Ebony wood tone
MT10 Tonearm Specifications
Bearing
Sapphire and Ceramic
Arm Tube
Dural-Aluminum
Counterweight
Eccentric
Adjustments
VTA, Antiskate, Azimuth
MT10 Turntable Specifications
Playback Speeds
33-1/3 rpm, 45 rpm and 78rpm
Motor Type
DC Brushless
Speed Control
Electronic w/ braking feature
Platter
Silicon Acrylic
Platter Bearing
Magnetic
MT10 External Power Supply
Specifications
Output Voltage
24 Volts, 625ma
Power Requirement
100 Volts, 50/60Hz at 400ma
110 Volts, 50/60Hz at 400ma
120 Volts, 50/60Hz at 400ma
220 Volts, 50/60Hz at 400ma
230 Volts, 50/60Hz at 400ma
240 Volts, 50/60Hz at 400ma
General Specifications
MT10 Turntable Specifications
Overall Dimensions
Width is 17-1/2 inches (44.45cm)
Height is 8-13/16 inches (22.38cm)
Depth is 21 inches (53.34cm)
Note: Tone Arm Height will vary depending on
type of Cartridge installed.
WEIGHT
62 lbs. net
For the Consumer's Protection
In order to ensure the highest level of customer satisfaction, "new" McIntosh products may only be purchased over-the-counter or delivered and installed by an Authorized McIntosh Dealer.
McIntosh products that are purchased over the Internet, by phone or mail order are presumed to be "used" and do not qualify for any McIntosh Warranty. McIntosh does not warrant, in any way, products that are purchased from anyone who is not an Authorized Dealer or products that have had their serial number altered or defaced.
