MA6300 Integrated Amplifiers

With 100 watts per channel into 8 ohms and 150 watts into 4 ohm loads, the MA6300 can effortlessly power virtually any speaker from one of seven source selections: CD1, CD2, Tuner, Phono, Tape, TV and DVD. Featured in the MA6300 is a dedicated, high performance headphone amplifier boasting low noise, extended frequency response and featuring ample gain to drive the finest quality headphones to life-like levels.

Electronic Specifications

Power Output per Channel

100 Watts into 8 ohms
150 Watts into 4 ohms

Speaker Impedance

4 or 8 Ohms

Rated Power Band

20Hz to 20kHz

Total Harmonic Distortion

0.005%

Dynamic Headroom

1.4dB

Frequency Response +0,-0.5dB

20Hz to 20kHz

Frequency Response, +0, -3dB

10Hz to 100kHz

Sensitivity Phono (Moving Coil)

N/A

Sensitivity Phono (Moving Magnet)

2.5mV

Sensitivity High Level (Balanced / Unbalanced)

0.5V/0.25V

Sensitivity (Power Amp)

1V

Signal To Noise Ratio (Moving Coil)

N/A

Signal To Noise Ratio (Moving Magnet)

84dB

Signal To Noise Ratio (High Level)

97dB

Signal To Noise Ratio (Power Amp)

110dB

Input Impedance (Balanced / Unbalanced)

20K/20K

Damping Factor

>200 @ 8 Ohms

Maximum Output (Balanced / Unbalanced)

8V Unbalanced

Connectivity

Headphone Output

Yes

High Level Inputs Unbalanced

5 Stereo

High Level Inputs Balanced

1 Stereo

Variable Outputs Unbalanced

1 Stereo

Variable Outputs Balanced

0

Digital USB Input

0

Digital Coaxial Input

0

Digital Optical Input

0

Phono Moving Magnet

Yes

Phono Moving Coil

No

AM/FM Tuner option

No

Home Theater Pass Through

No

Control

Tone Controls

No

Tone Bypass and Input Assign

No

RS232 Control Input

No

Power Control Output

Yes

Rear Panel Data Ports

Yes

Rear Panel IR Sensor Input

No

Input Level Match

No

General Specifications

Dual Layer Chassis

No

Output Meters

Yes

Tube or Solid State

Solid State

Power Requirement

120V 50/60Hz, 3.2A

Standby Power Requirement

N/A

Output Autoformer

No

Weights & Dimensions

Dimensions (W x H x D)

17-1/2" (44.45cm) x 7-5/8" (19.37cm) x 22" (55.88cm)

Weight

37 lbs (16.8 kg)

Shipping Weight

55 lbs (25 kg)

Featured Products In This Category

MA8000

2-Channel Integrated Amplifier

  • ​300 Watts x 2 channel
  • Discrete eight band tone control

MA7000

2-Channel Integrated Amplifier

  • 250 Watts x 2 channel
  • Flexible full featured preamp

MA7900

2-Channel Integrated Amplifier

  • ​200 Watts x 2 channel
  • Discrete five band tone control

MA6700

2-Channel Integrated Amplifier

  • 200 Watts x 2 channel
  • Optional AM/FM tuner available

MAC6700

2-Channel Stereo Receiver

  • 200 Watts x 2 channel
  • AM/FM Tuner and 11 total inputs

MA6600

2-Channel Integrated Amplifier

  • 200 Watts x 2 channel
  • Optional AM/FM/HD tuner available

MA5200

2-Channel Integrated Amplifier

  • ​100 Watts x 2 channel
  • 9 total inputs

MA6300

2-Channel Integrated Amplifier

  • 100 Watts x 2 channel into 8 ohms
  • 150 Watts x 2 channel into 4 ohms

MHA100

2-Channel Headphone Amplifier

  • ​3 headphone impedance ranges
  • Small, compact size
Recommended Products

MR88

AM/FM/XM/HD Tuner

  • Classic dial meter display
  • 20 presets per tuning mode

MCD301

2-Channel SACD/CD Player

  • Quiet Drive Mechanism
  • Variable output headphone, volume control

MEN220

Room Correction System

  • Works on 1/12 Octaves
  • 2-Way Electronic Crossover for Bi-amping

MPC1500

Power Controller

  • Isolation Transformer to Shield Components
  • Connect up to 12 components

XR200

Floor Standing Loudspeaker System

  • 3-Way Loudspeaker
  • Custom Made 8" LD/HP Driver