Hover image to activate zoom
View Larger Image
Print this page
Add to your wishlists
Please enter your inquiry in the fields below. A representative will respond to your inquiry within 72 hours.
With tracking force, anti-skate and cartridge position preset at the factory, the McIntosh MT10 delivers high performance LP playback with minimal set up. A custom tonearm features a rigid, dural-aluminum arm-tube gimbaled in two sapphire (horizontal) and two ceramic (vertical) bearings for the least possible friction. A .5mV moving coil cartridge is included, and features an ebony body with an elliptical stylus. Enjoy a new level of music with the MT10 turntable. This source component will help make your home theater system even better.
Moving Coil, Low Output
0.5 mV at 5 cm/s
400 to 500 Ohms recommended
20Hz to 50kHz
Greater than 30dB at 1Khz
6 x 10-6 cm/dyne
Less than 0.3 dB at 1kHz
Sapphire and Ceramic
VTA, Antiskate, Azimuth
33 1/3, 45 and 78 rpm
Electronic w/ braking feature
Magnetic Suspended Ceramic
17-1/2" (44.45cm) x 8-13/16" (22.38cm) x 21" (53.34cm)
Note: Tone Arm Height will vary depending on the type of Cartridge installed.
42 lbs (19 kg)
63 lbs (28.6 kg)
MT10 Precision Turntable Brochure (0.13 MB) (2/24/2011)
MT10 Precision Turntable Owner's Manual (6.39 MB) (3/2/2011)
MT10 Review RevisMarket Magazine (Portugal) May 2008 (0.11 MB) Download
2-Channel Precision Turntable
Floor Standing Loudspeaker System
Room Correction System
© 2014 McIntosh Laboratory, Inc.
McIntosh Laboratory, Inc. - 2 Chambers Street - Binghamton, NY 13903-2699 - Phone (607) 723-3512 / (800) 538-6576 - Fax (607) 724-0549