C500 Preamplifiers

The C500 stereo preamplifier is a luxurious two box design where the power supply control section is separate from the audio processing chassis. By keeping the control and sound processing separate, this innovative design produces the purest audio performance possible.

The C500 consists of three separate modules: a C500C control unit, a C500P transistor preamplifier, and a C500T vacuum tube preamplifier. Inside each module, the left and right channels are electrically and mechanically isolated from each other to allow true dual mono operation - resulting in the ultimate stereo separation and sonic purity. You can choose to have your system configured with either the transistor preamplifier for the absolute finest crystalline sound quality, or with the tube preamplifier to produce that warm, organic tube sound. If you’d like the option of having both preamp sections, see our C1000 stereo preamplifier.

Featuring the famed McIntosh blue output meters, the C500 also includes a powerful headphone amplifier, both moving magnet (MM) and moving coil (MC) phono sections, and home theater pass through capabilities.

Electronic Specifications

Ultra Low Distortion

C500P: 0.002%
C500T: 0.08%

Frequency Response, +0, -3dB

C500P: 15Hz to 100,000Hz
C500T: 15Hz to 100,000Hz

Maximum Volts Out (Balanced / Unbalanced)

C500P: 25/12 V RMS
C500T: 20/10 V RMS

Input Impedance (Balanced / Unbalanced)

C500P: 44K ohm, 22K ohm
C500T: 44K ohm, 22K ohm

Phono Voltage Gain

C500P: 60dB
C500T: 60dB

High Level Voltage Gain

C500P: 15dB
C500T: 15dB

Signal To Noise Ratio

C500P: 100dB
C500T: 93dB

Dual Mono Power Supply

Yes

Dual Mono, Fully Balanced

C500P: Yes
C500T: Yes

Connectivity

Headphone Output

C500P: Yes 1/4"
C500T: Yes 1/4"

Inputs Unbalanced

C500P: 4 Stereo + 2 Phono
C500T: 4 Stereo + 2 Phono

Inputs Balanced

C500P: 3 Stereo
C500T: 3 Stereo

Variable Outputs Unbalanced

C500P: 3 Stereo
C500T: 3 Stereo

Variable Outputs Balanced

C500P: 3 Stereo
C500T: 3 Stereo

Digital USB Input

C500P: 0
C500T: 0

Digital Coaxial Input

C500P: 0
C500T: 0

Digital Optical Input

C500P: 0
C500T: 0

Phono Moving Magnet

C500P: Yes, adjustable
C500T: Yes, adjustable

Phono Moving Coil

C500P: Yes, adjustable
C500T: Yes, adjustable

Record Processor Loop

C500P: Yes
C500T: Yes

Input Level Match

C500P: Yes, +/- 6dB
C500T: Yes, +/- 6dB

Home Theater Pass Through

C500P: Yes
C500T: Yes

Control

Tone Controls

C500P: No
C500T: No

Tone Bypass and Input Assign

C500P: No
C500T: No

RS232 Control Input

No

Power Control Output

2 Main, 2 Switched

Rear Panel Data Ports

Yes, 8

Rear Panel IR Sensor Input

Yes

General Specifications

Multi-Chassis or Single

Multi Chassis (C500C plus C500P or C500T)

Output Meters

C500P: Yes
C500T: Yes

Tube or Solid State

C500P: Solid State
C500T: Tube, 8 ea. 12AX7a

On, Power Consumption

75 watts

Weights & Dimensions

Dimensions (W x H x D)

All 3 chassis:
17.5" (44.45cm) x 6" (15.25cm) x 23" (58.42cm)

Weight

C500C: 30.1 lbs (17.7 kg)
C500P: 25.1 lbs (15 kg)
C500T: 26.4 lbs (15.4 kg)

Shipping Weight

C500C: 46.5 lbs (27.9 kg)
C500P: 41.5 lbs (24.3 kg)
C500T: 42.8 lbs (24.8 kg)

Featured Products In This Category

C1000

2-Channel Preamplifier

  • Configurable Tube/Solid State/Controller
  • Dual-Mono design

C500

2-Channel Preamplifier

  • Tube or Solid State
  • MM and MC Phono

C2500

2-Channel Tube Preamplifier

  • Combines legendary McIntosh tube sound with digital high resolution audio playback

C2300

2-Channel Tube Preamplifier

  • MM and MC Phono
  • 7 Inputs

C50

2-Channel Preamplifier

  • Advanced digital inputs including USB
  • USB DAC with 32bit, 192kHz (96kHz) interface

C48

2-Channel Preamplifier

  • 5 band tone controls
  • Analog inputs

D100

2-Channel Digital Preamplifier

  • 2 Coax, 2 Optical, 1 USB Input
  • Advanced Quad Balanced DAC

C220

2-Channel Tube Preamplifier

  • 7 Unbalanced high level inputs
  • 2 Balanced (XLR) inputs
Recommended Products

MC1.2KW

1-Channel Amplifier

  • 1,200 Watt Monoblock
  • Remote Power Control

XRT1K

Floor Standing Loudspeaker System

  • 1,200 Watts Power Handling
  • Ported, 3-Way design

MT10

2-Channel Precision Turntable

  • Belt Drive
  • MC Cartridge

MCD1100

2-Channel SACD/CD Player

  • Advanced SACD/CD/WMA/MP3 Player
  • Five additional Digital Inputs, USB

MEN220

Room Correction System

  • Works on 1/12 Octaves
  • 2-Way Electronic Crossover for Bi-amping

MPC1500

Power Controller

  • Isolation Transformer to Shield Components
  • Connect up to 12 components