MPC1500 Specialty Products

Today’s AC power is littered with byproduct from the operation of millions of personal computers, satellite set-top boxes and myriad other noise inducing devices. The new MPC1500 Power Controller provides total isolation, low noise, and maximum power transfer to enable the best performance possible from your McIntosh components. The MPC1500 features a large torroidal transformer that has been specially wound to act as a low pass filter to remove unwanted harmonic noise on the incoming AC line, while a quick-acting surge suppression circuit features a clamping voltage onset of about 2V above peak nominal voltage for the best possible product protection.

Electronic Specifications

Load Regulation

± 2.5 %

Output Voltage

120 Volts AC Nominal

Power Requirement

120 Volts, 60Hz
12.0 Amps, maximum current
1440 Watts, maximum power

Weights & Dimensions

Dimensions (W x H x D)

17-1/2" (44.45cm) x 7-5/8" (19.37cm) (including feet) x 22" (55.88cm) (including front panel, knobs and cables)

Weight

87 lbs (39.46 kg)

Shipping Weight

105 lbs (47.63 kg)

Product Literature


MPC1500 Power Controller Brochure (0.14 MB) (2/24/2011) Download


MPC1500 Power Controller FAQ Sheet (0.07 MB) (3/28/2011) Download


User Documents


MPC1500 Power Controller Owner's Manual (8.31 MB) (3/2/2011) Download


Products In This System

MC2KW

1-Channel Amplifier

  • 2,000 Watt Monoblock
  • 3 terminal sets for tri-wiring

MC1.2KW

1-Channel Amplifier

  • 1,200 Watt Monoblock
  • Remote Power Control

C1000

2-Channel Preamplifier

  • Configurable Tube/Solid State/Controller
  • Dual-Mono design

MX151

A/V Control Center

  • ​HDMI switching with 3D Video Pass-Through
  • RoomPerfect audio correction

MVP891

Audio Video Player

  • Cutting edge video and sound quality
  • Plays Blu-ray, 3D, DVD, CD, SACD, CD-R/RW...

MCD1100

2-Channel SACD/CD Player

  • Advanced SACD/CD/WMA/MP3 Player
  • Five additional Digital Inputs, USB

MPC1500

Power Controller

  • Isolation Transformer to Shield Components
  • Connect up to 12 components

XRT2K

Floor Standing Loudspeaker System

  • 2,000 Watts of Power
  • 110 Drivers each

XCS2K

Center Channel Loudspeaker

  • 2,000 Watts Rated Power
  • Bi/Tri Wire and Bi/Tri Amp Capabilities

XRT1K

Floor Standing Loudspeaker System

  • 1,200 Watts Power Handling
  • Ported, 3-Way design
Recommended Products

C500

2-Channel Preamplifier

  • Tube or Solid State
  • MM and MC Phono

MC1.2KW

1-Channel Amplifier

  • 1,200 Watt Monoblock
  • Remote Power Control

XRT1K

Floor Standing Loudspeaker System

  • 1,200 Watts Power Handling
  • Ported, 3-Way design

MEN220

Room Correction System

  • Works on 1/12 Octaves
  • 2-Way Electronic Crossover for Bi-amping