MT10 Precision Turntable

With tracking force, anti-skate and cartridge position preset at the factory, the McIntosh MT10 Precision Turntable delivers high performance LP playback with minimal set up. A custom tonearm features a rigid, dural-aluminum arm-tube gimbaled in two sapphire (horizontal) and two ceramic (vertical) bearings f​or the least possible friction. A .5mV moving coil cartridge is included, and features an ebony body with an elliptical stylus. Enjoy a new level of music with the MT10 turntable. This source component will help make your home theater system even better. Contact your local dealer​ to learn more. ​​​​​​​​​​​

Cartridge Specifications

Cartridge Type

Moving Coil, Low Output

Output Level

0.5 mV at 5 cm/s

Load Impedance

400 to 500 Ohms recommended

Frequency Response

20Hz to 50kHz

Channel Separation

Greater than 30dB at 1Khz

Compliance

6 x 10-6 cm/dyne

Recommended Tracking Force

2.4 g

Channel Difference

Less than 0.3 dB at 1kHz

Total Mass

11 g

Stylus

Elliptical Diamond

Cantilever Material

Aluminum

Tonearm Specifications

Bearing

Sapphire and Ceramic

Arm Tube

Dural-Aluminum

Counterweight

Eccentric

Adjustments

Vertical Tracking Angle, Antiskate, Azimuth

Turntable Specifications

Playback Speeds

33 1/3, 45 and 78 rpm

Motor Type

DC Brushless

Speed Control

Electronic w/ braking feature

Platter

Silicon Acrylic

Platter Bearing

Magnetic Suspended Ceramic

Connectivity

Stereo Outputs Unbalanced

1

Control

Power Control Input

1

Power Control Output

1

Platter Light

Yes

Speed Control Fine Adjustment

Yes

General Specifications

Dust Cover Included

No

Weights & Dimensions

Dimensions (W x H x D)

17-1/2" (44.45cm) x 8-13/16" (22.38cm) x 21" (53.34cm)
Note: Tone Arm Height will vary depending on the type of Cartridge installed.

Weight

42 lbs (19 kg)

Shipping Weight

63 lbs (28.6 kg)

Products In This Collection

MC2KW

1-Channel Amplifier

  • 2,000 Watt Quad Balanced Monoblock
  • 3 speaker terminals for tri-wiring

MEN220

Room Correction System

  • Works on 1/12 Octaves
  • 2-Way Electronic Crossover for Bi-amping

MPC1500

Power Controller

  • Isolation Transformer to Shield Components
  • Connect up to 12 components

MT10

Precision Turntable

  • Belt drive; Moving Coil cartridge
  • Illuminated speed meter

XRT2K

Floor Standing Loudspeaker System

  • 2,000 Watts of Power
  • Tri-wire a​nd tri-amp capabilities
Recommended Products

MC452

2-Channel Amplifier

  • 450 Watts x 2 Channels
  • Quad B​alanced

C1100

2-Channel Vacuum Tube Preamplifier

  • Separate audio & control sections
  • 12 analog inputs including MC & MM phono

MP1100

2-Channel Vacuum Tube Phono Preamplifier

  • Fully balanced phono stage
  • 5 equalization curves; 2 noise filters

MEN220

Room Correction System

  • Works on 1/12 Octaves
  • 2-Way Electronic Crossover for Bi-amping

MPC1500

Power Controller

  • Isolation Transformer to Shield Components
  • Connect up to 12 components

XR200

Floor Standing Loudspeaker System

  • 3-Way Loudspeaker
  • Custom Made 8" LD/HP Driver

Audio Cables

  • Copper foil shielding
  • ​Standard lengths: 1 or 2 meters (custom lengths available)