Hover image to activate zoom
View Larger Image
Print this page
Add to your wishlists
Please enter your inquiry in the fields below. A representative will respond to your inquiry within 72 hours.
Today’s AC power is littered with byproduct from the operation of millions of personal computers, satellite set-top boxes and myriad other noise inducing devices. The new MPC1500 Power Controller provides total isolation, low noise, and maximum power transfer to enable the best performance possible from your McIntosh components. The MPC1500 features a large torroidal transformer that has been specially wound to act as a low pass filter to remove unwanted harmonic noise on the incoming AC line, while a quick-acting surge suppression circuit features a clamping voltage onset of about 2V above peak nominal voltage for the best possible product protection.
± 2.5 %
120 Volts AC Nominal
120 Volts, 60Hz
12.0 Amps, maximum current
1440 Watts, maximum power
17-1/2" (44.45cm) x 7-5/8" (19.37cm) (including feet) x 22" (55.88cm) (including front panel, knobs and cables)
87 lbs (39.46 kg)
105 lbs (47.63 kg)
MPC1500 Power Controller Brochure (0.14 MB) (2/24/2011)
MPC1500 Power Controller FAQ Sheet (0.07 MB) (3/28/2011)
MPC1500 Power Controller Owner's Manual (8.31 MB) (3/2/2011)
Room Correction System
2-Channel Integrated Audio System
Audio Stream and App
Floor Standing Loudspeaker System
© 2014 McIntosh Laboratory, Inc.
McIntosh Laboratory, Inc. - 2 Chambers Street - Binghamton, NY 13903-2699 - Phone (607) 723-3512 / (800) 538-6576 - Fax (607) 724-0549