Capable of true-to-life sound reproduction that belies its diminutive size (the product measures 22.5” long, 10.6” high, and 14.9” deep, including loudspeakers), the MXA60 is a full-blown McIntosh HIFI in-miniature. Now, perhaps for the first time, music aficionados need not trade performance for convenience. Conceived and executed by the same team responsible for the $250,000 McIntosh Reference System, the MXA60 stands ready to introduce a whole new range of music lovers to the pleasures of owning a hand-made audio system; a system steeped in the McIntosh traditions of unerring quality and value; a system that is built to last a lifetime. Amplifier SpecificationsDynamic Headroom1.6dB Frequency Response+0, -0.5dB from 20Hz to 20,000Hz
+0, -3dB from 10Hz to 100,000Hz Headphone Impedance20-300 ohms Input ImpedanceInput 1: 20K ohms unbalanced
Input 2: 20K ohms balanced Intermodulation Distortion0.05% maximum, if the instantaneous peak power output
is 150 watts or less per channel with both channels operating for any combination of frequencies from 20Hz to 20,000Hz Main/Sub Output1.2V for rated input (4V Maximum) Main/Sub Output Impedance500 ohms Maximum Input SignalInput 1: 4V
Input 2: 8V Output Load Impedance8 ohms Power GuardLess than 2% THD with up to 12dB overdrive at 1,000Hz Power Output75 watts into an 8 ohm load is the minimum sine wave continuous average power output, both channels operating Rated Power Band20Hz to 20,000Hz Sensitivity (for rated output)Input 1: 300mV unbalanced
Input 2: 600mV balanced Signal To Noise Ratio (A-Weighted)CD, Input1, Input 2: 98dB below rated output Tone Controls (Bass and Treble)Bass ±10dB (in 1dB steps) at 70Hz
Treble ±10dB (in 1dB steps) at 10kHz Total Harmonic Distortion0.05% maximum harmonic distortion at any power level from 250 milliwatts to rated power, 20Hz to 20,000Hz Voltage GainInput 1 and 2 to Main Output: 12dB
Power Amplifier: 26dB Wide Band Damping FactorGreater than 100 FM Tuner Specifications50dB Quieting Sensitivity1.5uV (14.8dBf) Antenna Input75 Ohms, Type “F” Coax connector Channel Selectivity60dB Adjacent Channel
66dB Alternate Channel Frequency Response±1dB 20 to 15,000Hz Harmonic DistortionMono: 0.4%
Stereo: 0.8% Signal To Noise RatioMono: 70dB
Stereo: 68dB Stereo Separation38dB Tuning Range87.5Mhz - 108.0Mhz (Europe)
87.9Mhz - 107.9Mhz (USA)
76Mhz - 90Mhz (Japan) Useable Sensitivity2.2uV (18.1dBf) AM Tuner SpecificationsAntenna InputRAA2 (supplied), Type “RJ45” connector Frequency Response0dB, -6dB 50Hz to 3,000Hz Harmonic Distortion0.5% Selectivity45dB Adjacent Channel Sensitivity350uV/m Signal To Noise Ratio50dB Tuning Range522khz - 1602khz (Europe)
530khz - 1710khz (USA)
522khz - 1611khz (Japan) SACD/CD Player SpecificationsChannel SeparationBetter than 98dB (1,000Hz) Disc FormatsSACD, CD, MP3 and WMA Dynamic RangeBetter than 100dB TransportLaser Type: Twin Beam
Laser Beam Wavelength:650nm (SACD)/790nm (CD)
Laser Power: CLASS IIa/CLASS I Loudspeaker SpecificationsCrossover Frequency2,000Hz Finish EnclosureHigh Gloss Black Finish GrilleBlack Knit Cloth Frequency Response60Hz - 45kHz Impedance8 ohms Nominal Power Handling75 Watts Sensitivity80dB (2.83V/1m equivalent) System Driver ComplementOne 4 inch Woofer/Midrange
One 3/4 inch Dome Tweeter FeaturesPower Requirement100V ~ 50/60Hz at 3.0 Amps
110V ~ 50/60Hz at 2.5 Amps
120V ~ 50/60Hz at 2.5 Amps
220V ~ 50/60Hz at 1.5 Amps
230V ~ 50/60Hz at 1.3 Amps
240V ~ 50/60Hz at 1.3 Amps
Standby: Less than 0.5 watt
Note: Refer to the rear panel of the MXA60 for the correct
voltage. System Overall DimensionsWidth is 22 inches (55.88cm)
Height is 10-7/8 inches (27.62cm)
Depth is 16 inches (40.64cm) including connectors
Note: When the Disc Player Tray is opened, the panel clearance required in front of mounting panel is 6-3/4 inches (17.2cm). System Shipping Carton DimensionsWidth is 35 inches (88.9cm)
Depth is 20 inches (50.8cm)
Height is 15-1/2 inches (39.4cm) System Weight64 pounds (29.03 Kg) net, 80 pounds (36.28 Kg) in shipping carton |
|