MC1.25KW 1-Channel Amplifier

Winner:

The MC1.25KW Quad Balanced Power Amplifier is our newest and one of our most advanced amplifiers. Redesigned from top to bottom, it replaces the venerable MC1.2KW as our most powerful single chassis monoblock amplifier. A simple glance at this 158 pound (71.7 kg) amp is enough to convey its power and performance capabilities, but when you hear it – then you’ll truly understand what it can do.

The MC1.25KW outputs 1,200 Watts of pure power into a single channel with a nearly imperceptible total harmonic distortion of 0.005%. This astonishing amount of power is fully available to 2, 4 or 8 Ohm speakers via our Autoformer™ technology. A pair of these amps can anchor a home audio system that can rival nearly any stereo system in the world.

Updates and enhancements abound in the MC1.25KW. A 50% increase in filter capacity improves the performance of low end frequencies as well as increasing dynamic headroom. The top of the amp showcases an updated yet unmistakable McIntosh industrial design that will fit right in with current McIntosh products or those made decades ago. The audio Autoformer and power transformer remain located just behind the front panel but are now contained in new glass topped enclosures. In between them is new circular glasswork housing the amplifier’s name badge that is adorned with a decorative trim ring.

The rear of the unit features 4 of our McIntosh Monogrammed Heatsinks™. Made from high quality materials with excellent thermal conductivity properties, these heatsinks are so efficient at dissipating heat that they warrant bearing the McIntosh “Mc” logo. They connect to advanced high current output transistors that eliminate thermal equilibrium lag time so that the first musical note played sounds just as good as songs played later in your listening session. The heatsinks are capped with handsome ventilation trim plates. These trim plates and the circular trim ring are made from aluminum and are finished to match the front panel handles. The AC receptacle has been repositioned to provide additional clearance so a wider assortment of power cords can more easily be used. All of this sits atop a polished stainless steel chassis which rests on 4 new redesigned feet that feature a chamfered edge. Other updates include an updated power transformer, heavier gauge internal wiring, upgraded circuit components, and the addition of our power management system that will turn the amp off after a set amount of time when no input signal has been detected.

With all the changes and improvements made in the MC1.25KW, one thing that hasn’t changed is the large, fast responding 11” (27.9 cm) blue Watt meter that accurately shows the amp’s power output. Also unchanged is the signature black glass front panel with control knobs, illuminated logo, and aluminum end caps with handles. The front panel and meter have new direct LED backlighting for improved appearance and color accuracy.

Other exclusive McIntosh features included in the MC1.25KW include:

  • Power Guard® that monitors and adjusts the input signal at the speed of light and makes real time adjustments to prevent harsh sounding and potentially speaker damaging clipping
  • Sentry Monitor™ - our fuse-less short-circuit protection circuit that disengages the output stage before current exceeds safe operating levels and then resets automatically when operating conditions return to normal
  • Quad Balanced design that cancels virtually all noise and distortion that may have crept into the audio signal
  • Power Control to send power on/off signals to other connected McIntosh components (such as CD Players, turntables, tuners​ and media streamers​) for easy system power up and shutdown
  • Our patented Solid Cinch™ speaker binding posts that easily but securely attach the speaker cables​ to prevent them from coming loose and possibly causing a short; the binding posts are also gold-plated to prevent corrosion and ensure a quality signal is sent over your speaker cables

Both a balanced and unbalanced output are included to make bi-amping or tri-amping your speakers easier; they can also be used to send the audio signal to a secondary system if your preamplifier does not have enough outputs or to connect a powered subwoofer. Contact your local dealer​ to learn more. ​
​​​​​​​
​​​​​​​​​​​​​​​​

Electronic Specifications

Power Output per Channel

1200 Watts @ 2, 4 or 8 Ohms

Number of Channels

1

Total Harmonic Distortion

0.005%

S/N below rated output

124dB balanced
120dB unbalanced

Dynamic Headroom

2.2dB

Damping Factor

>40 Wideband

Rated Power Band

20Hz to 20kHz

Frequency Response

+0, -0.25dB from 20Hz to 20,000Hz
+0, -3dB from 10Hz to 100,000Hz

Control

Remote Power Control

Yes

Multi-Channel DB25 Cable

N/A

General Specifications

Circuit Configuration

Quad Balanced

Circuit Design

Solid State

Mono Bridge

N/A

Mono Parallel

N/A

Autoformer

Yes

Meters

Yes

Meter Light Switch

Yes

Balanced Input

1

Front Panel

1/2" Glass with handles

Illumination

Direct LED

Chassis Style

Polished stainless steel & black painted steel

Connectivity

Speaker Binding Post Type

Patented Solid Cinch™ Speaker Binding Posts

Weights & Dimensions

Dimensions (W x H x D)

17-3/4" (45.09cm) x 12-5/16" (31.27cm) (including feet) x 22" (55.88cm) (including the front panel and cables)

Weight

158 lbs (71.7 kg)

Shipping Weight

184 lbs (83.4 kg)

Featured Products In This Category

MC2KW

1-Channel Amplifier

  • 2,000 Watt Quad Balanced Monoblock
  • 3 speaker terminals for tri-wiring

MC1.25KW

1-Channel Amplifier

  • ​1,200 Watt Quad Bala​nced Monoblock
  • Redesigned from top to bottom

MC1.2KW

1-Channel Amplifier

  • 1,200 Watt Quad Balanced Monoblock
  • Remote Power Control

MC601

1-Channel Amplifier

  • 600 Watt Quad Balanced Monoblock
  • High power in a compact chassis

MC2301

1-Channel Vacuum Tube Amplifier

  • 300 Watt Quad Balanced Monoblock
  • Vacuum tube powered

MC301

1-Channel Amplifier

  • 300 Watt Quad Balanced Monoblock
  • Space saving 6" tall chassis

MC75

1-Channel Vacuum Tube Amplifier

  • 75 Watts x 1 channel
  • Vacuum tube design

MC452

2-Channel Amplifier

  • 450 Watts x 2 Channels
  • Quad B​alanced

MC302

2-Channel Amplifier

  • 300 Watts x 2 Channels
  • Great for music or home theater systems

MC152

2-Channel Amplifier

  • 150 Watts x 2 Channels
  • Space saving 6" tall chassis

MC275

2-Channel Vacuum Tube Amplifier

  • 75 Watts x 2 channel
  • Vacuum Tube Design

MC303

3-Channel Amplifier

  • 300 Watts x 3 Channels
  • Tri-Amp capability

MC205

5-Channel Amplifier

  • 200 Watts x 5 Channels
  • Balanced and unbalanced inputs

MC207

7-Channel Amplifier

  • 200 Watts x 7 Channels
  • Balanced and unbalanced inputs

MC8207

7-Channel Amplifier

  • 200 Watts x 7 Channels
  • LED power output indicators
Recommended Products

C1100

2-Channel Vacuum Tube Preamplifier

  • Separate audio & control sections
  • 12 analog inputs including MC & MM phono

D1100

2-Channel Digital Preamplifier

  • Reference level digital preamp and DAC
  • Use as standalone unit or with C1100

MT10

Precision Turntable

  • Belt drive; Moving Coil cartridge
  • Illuminated speed meter

MCD550

2-Channel SACD/CD Player

  • ​8-Channel, 32-bit/192kHz Quad Balanced DAC
  • USB input for digital aud​io playback

MR87

AM/FM Tuner

  • Proprietary radio-frequency circuitry
  • Advanced low distortion performance

MB50

Streaming Audio Player

  • Make your audio system a wireless system
  • DTS Play-Fi® wireless streaming

XRT1K

Floor Standing Loudspeaker System

  • 1,200 Watts Power Handling
  • Ported, 3-Way design

Speaker Cables

  • Gold plated spade
  • ​Standard lengths: 2 or 3 meters (custom lengths available)