With 100 watts per channel into 8 ohms and 150 watts into 4 ohm loads, the MA6300 can effortlessly power virtually any speaker from one of seven source selections: CD1, CD2, Tuner, Phono, Tape, TV and DVD. Featured in the MA6300 is a dedicated, high performance headphone amplifier boasting low noise, extended frequency response and featuring ample gain to drive the finest quality headphones to life-like levels.
Electronic Specifications
Power Output per Channel
100 Watts into 8 ohms
150 Watts into 4 ohms
Speaker Impedance
4 or 8 Ohms
Rated Power Band
20Hz to 20kHz
Total Harmonic Distortion
0.005%
Dynamic Headroom
1.4dB
Frequency Response +0,-0.5dB
20Hz to 20kHz
Frequency Response, +0, -3dB
10Hz to 100kHz
Sensitivity Phono (Moving Coil)
N/A
Sensitivity Phono (Moving Magnet)
2.5mV
Sensitivity High Level (Balanced / Unbalanced)
0.5V/0.25V
Sensitivity (Power Amp)
1V
Signal To Noise Ratio (Moving Coil)
N/A
Signal To Noise Ratio (Moving Magnet)
84dB
Signal To Noise Ratio (High Level)
97dB
Signal To Noise Ratio (Power Amp)
110dB
Input Impedance (Balanced / Unbalanced)
20K/20K
Damping Factor
>200 @ 8 Ohms
Maximum Output (Balanced / Unbalanced)
8V Unbalanced
Connectivity
Headphone Output
Yes
High Level Inputs Unbalanced
5 Stereo
High Level Inputs Balanced
1 Stereo
Variable Outputs Unbalanced
1 Stereo
Variable Outputs Balanced
0
Digital USB Input
0
Digital Coaxial Input
0
Digital Optical Input
0
Phono Moving Magnet
Yes
Phono Moving Coil
No
AM/FM Tuner option
No
Home Theater Pass Through
No
Control
Tone Controls
No
Tone Bypass and Input Assign
No
RS232 Control Input
No
Power Control Output
Yes
Rear Panel Data Ports
Yes
Rear Panel IR Sensor Input
No
Input Level Match
No
General Specifications
Dual Layer Chassis
No
Output Meters
Yes
Tube or Solid State
Solid State
Power Requirement
120V 50/60Hz, 3.2A
Standby Power Requirement
N/A
Output Autoformer
No
Weights & Dimensions
Dimensions (W x H x D)
17-1/2" (44.45cm) x 7-5/8" (19.37cm) x 22" (55.88cm)
Weight
37 lbs (16.8 kg)
Shipping Weight
55 lbs (25 kg)