D1100 2-Channel Digital Preamplifier

The D1100 Digital Preamplifier is a reference level stereo preamplifier and digital-to-analog converter (DAC). Its 8-channel, 32-bit DAC is used in Quad Balanced mode with half of it dedicated to the left audio channel and the other half to the right channel. It’s the most advanced DAC we’ve ever used and delivers an unprecedented level of performance so that all your digital music is reproduced with exceptional accuracy and authenticity.

Enough inputs – 9 to be exact – are included to keep even the largest digital system connected as 3 optical, 3 coaxial (2 RCA and 1 BNC), plus 1 each of MCT, AES/EBU and USB inputs are onboard. The USB input accepts up to 32-bit/384kHz signals and supports DSD64, DSD128, DSD256, DXD 352.8kHz and DXD 384kHz playback1. All the other inputs accept up to 24-bit/192kHz. The MCT input is a McIntosh exclusive and allows for enjoying to the high resolution audio found on SACDs via the MCT450 SACD/CD Transport. Three sets of balanced and unbalanced stereo outputs connect the D1100 to your system. One set of outputs has fixed volume while the other 2 have variable volume; the variable outputs can also be switched on and off for additional user configurability.

The D1100 "has a way of reproducing music in an incredibly engaging, yet transparent style... The sound quality of a wide range of music played through the D1100 was rich, vibrant and lush, yet incredibly detailed." Named to the Computer Audiophile Suggested Hardware (CASH) List. - Computer Audiophile

The D1100 is designed for ease of use: all inputs can be renamed; its 4 data ports and 4 power control triggers are fully programmable; and it has both IR and RS232 external control. For personal listening, Headphone Crossfeed Director (HXD®) will bring a new depth and spatiality to your music.

The D1100 is a full featured, fully functional self-contained unit that can be used independently of any other preamplifier. But thanks to McIntosh’s engineering prowess, it can also be connected to and used in tandem with its analog equivalent, the C1100 Vacuum Tube Preamplifier.2 Combining the two together with the included umbilical cable creates the definitive analog and digital stereo preamplifier. When connected, the C1100 takes over all control of the D1100 resulting in a single and easy to use interface. Like the C1100, the D1100’s left and right audio channels and power supplies are electrically isolated from each other to produce true dual mono operation when used either by itself or with the C1100. This isolation delivers absolute stereo separation and sonic purity.

"Through the D1100, I was sitting in the best seat in the concert hall. Through my [current preamp], I was clearly listening to a recording of a live event... Amazing bass, a beautiful midrange, detailed and airy treble, stunning imaging, and an expansive soundstage. It brought out the best qualities of my speakers and made them sound better than I had ever heard them before." - Secrets of Home Theater and High Fidelity

It’s housed in a beautifully polished stainless steel and hairline brushed black Titanium stainless steel chassis – the same as the C1100 so the two will seamlessly blend with each other if used together. A black glass front panel, blue meters, knobs, an illuminated logo and brushed aluminum end caps complete the ageless McIntosh look. It can be paired with a variety of amplifiers, room correction devices, speakers, CD players, streaming audio players and other source components to make a complete home audio system. Contact your local dealer to learn more.

1) Please see Downloads tab for required driver that must be installed on Windows based computers (if an Apple based computer is used, no additional driver is required). See Owner's Manual for driver instructions.
2) The C1100 firmware will need to be updated to its latest version for proper operation with the D1100.

​​

Electronic Specifications

Total Harmonic Distortion

0.0015% (at 2V Output)

Frequency Response

+/-0.5dB from 4Hz to 20,000Hz
+0.5/-3dB from 4Hz to 68,000Hz

Maximum Volts Out (Balanced / Unbalanced)

16/8 V RMS

Input Impedance (Balanced / Unbalanced)

N/A

Phono Voltage Gain

N/A

High Level Voltage Gain

N/A

Signal To Noise Ratio

111dB

Dual Mono Power Supply

Yes

Dual Mono, Fully Balanced

Yes

Connectivity

Balanced Input

0

Unbalanced Input

0

Phono Input Moving Coil

0

Phono Input Moving Magnet

0

Digital Coaxial Input

3 (2 RCA and 1 BNC)

Digital Optical Input

3

Digital MCT (DIN) Input

1

Digital USB Input

1 (accepts PCM signals up to 32-bit/384kHz; supports DSD64, DSD128 and DSD256 plus DXD 352.8kHz and DXD 384kHz)

Digital AES/EBU Input

1

Balanced Fixed Output

1 Stereo

Balanced Variable Output

2 Stereo

Unbalanced Fixed Output

1 Stereo

Unbalanced Variable Output

2 Stereo

Headphone Output

1/4" High Drive with Headphone Crossfeed Director (HXD®)

Record Processor Loop

No

Input Level Match

No

Home Theater PassThru

No

Unbalanced Analog Connector Type

Premium gold-plated solid brass

Control

Tone Controls

No

Tone Bypass and Input Assign

No

RS232 Control Input

Yes

Power Control Output

4 Trigger

Rear Panel Data Port

4

Rear Panel IR Sensor Input

Yes

General Specifications

Multi-Chassis or Single

Single

Output Meters

Yes

Vacuum Tube or Solid State

Solid State

Power Consumption (On)

30 watts

Weights & Dimensions

Dimensions (W x H x D)

17.5" (44.45cm) x 6" (15.24cm) x 19" (48.3cm)

Weight

26 lbs (11.8 kg)

Shipping Weight

41 lbs (18.6 kg)

Featured Products In This Category

MA5300

2-Channel Integrated Amplifier

  • ​100 Watts into 8 Ohm; 160 Watts into 4 Ohm
  • DA1 Digital Audio Module

MHA50

Portable Decoding Amplifier

  • Comparably sized to smartphones
  • Wired & Bluetooth inputs

MAC7200

2-Channel Receiver

  • 200 Watts x 2 channel
  • DA1 Digital Audio Module; AM/FM Tuner

MA7200

2-Channel Integrated Amplifier

  • ​200 Watts x 2 channel
  • DA1 Digital Audio Module

MCT80

2-Channel SACD/CD Transport

  • ​Coax, optical & MCT outputs
  • Compact size; Plays all common disc types

MA9000

2-Channel Integrated Amplifier

  • ​300 Watts x 2 channel; 8-band tone control
  • DA1 Digital Audio Module

MA8900

2-Channel Integrated Amplifier

  • ​200 Watts x 2 channel; 5-band tone control
  • DA1 Digital Audio Module

MCD350

2-Channel SACD/CD Player

  • ​2-Channel, 32-bit/192kHz DAC
  • Fixed analog stereo outputs

MXA80

2-Channel Integrated Audio System

  • 50 Watts x 2 channel; Speakers included
  • Supports DSD64, DSD128 & DSD256 files

McIntosh Music

Audio Stream and App

  • Listen online at mcintoshlabs.com/music
  • ​Available for iOS or Android devices

AP1 Audio Player

McIntosh App

  • Audio player for your iTunes library
  • Designed for iPhone, iPod and iPad
Recommended Products

C1100

2-Channel Vacuum Tube Preamplifier

  • Separate audio & control sections
  • 12 analog inputs including MC & MM phono

MC1.2KW

1-Channel Amplifier

  • 1,200 Watt Quad Balanced Monoblock
  • Remote Power Control

MC601

1-Channel Amplifier

  • 600 Watt Quad Balanced Monoblock
  • High power in a compact chassis

MC452

2-Channel Amplifier

  • 450 Watts x 2 Channels
  • Quad B​alanced

MCT450

2-Channel SACD/CD Transport

  • ​Balanced, coax, optical & MCT outputs
  • Compatible with all common disc types

MB100

Media Bridge

  • Hub for all your digital media
  • Enjoy your favorite streaming services

MB50

Streaming Audio Player

  • Make your audio system a wireless system
  • DTS Play-Fi® wireless streaming

XRT1K

Floor Standing Loudspeaker System

  • 1,200 Watts Power Handling
  • Ported, 3-Way design

XR100

Floor Standing Loudspeaker System

  • 75 to 600 watts
  • Ported 4-Way Floor Standing