C220 allows for electronic, independent level adjustment for each of the eight source inputs via the front panel or remote control. Channel balance is electronically adjusted and stored in memory. A moving magnet phono stage incorporates time-proven 12AX7 Vacuum Tubes, for simplicity and superior performance. C220 have low-distortion bass and treble controls, invaluable for older recordings, provide a wide range of tonal adjustment and may be bypassed when not needed. This versatile Preamplifier provides connection for various input sources and outputs to drive multiple Power amplifiers.
Electronic Specifications
Ultra Low Distortion
0.08%
Frequency Response, +0, -3dB
15Hz to 40,000Hz
Maximum Volts Out (Balanced / Unbalanced)
16/8 V RMS
Input Impedance (Balanced / Unbalanced)
44k ohm, 22K ohm
Phono Voltage Gain
55dB
High Level Voltage Gain
15dB
Signal To Noise Ratio
90dB
Dual Mono Power Supply
No
Dual Mono, Fully Balanced
No
Connectivity
Headphone Output
Yes 1/4"
Inputs Unbalanced
7 Stereo + Phono
Inputs Balanced
2 Stereo
Variable Outputs Unbalanced
2 Stereo
Variable Outputs Balanced
1 Stereo
Digital USB Input
0
Digital Coaxial Input
0
Digital Optical Input
0
Phono Moving Magnet
Yes
Phono Moving Coil
No
Record Processor Loop
No
Input Level Match
Yes, +/- 6dB
Home Theater Pass Through
No
Control
Tone Controls
Yes, 8
Tone Bypass and Input Assign
Yes
RS232 Control Input
No
Power Control Output
1 Main, 1 ACC, 2 trigger
Rear Panel Data Ports
Yes, 8
Rear Panel IR Sensor Input
Yes
General Specifications
Multi-Chassis or Single
Single
Output Meters
No
Tube or Solid State
Tube, 4, 12AX7a
On, Power Consumption
75 watts
Weights & Dimensions
Dimensions (W x H x D)
17.5" (44.45cm) x 6" (15.24cm) x 18" (45.72cm)
Weight
21.1 lbs (9.59 kg)
Shipping Weight
37 lbs (17.05 kg)