- 200 Watts x 7 Channels
- Designed for home theaters
- Balanced and unbalanced inputs
MC207
7-Channel Solid State Amplifier
Similar to the MC205, the MC207 7-channel home theater amplifier produces an amazing movie experience in your home by delivering 200 Watts of power to each speaker channel found in 7.1 home theater systems. It can also be used in 5.1 home theaters with the remaining 2 channels used to power a second zone in stereo. Our exclusive Dynamic Power Manager® (DPM) technology enables the MC207 to deliver its full power into both 4 and 8 Ohm speakers - making it compatible with a wide variety of home theater speakers.
As with the MC205, the MC207 does not need cooling fans so there is no fan noise to interfere with your movie’s soundtrack. It features Power Guard® to prevent potential speaker damage caused by clipping and over-driving of the amplifier. Short-circuit protection is provided by our Sentry Monitor™ technology that disengages the output stage before current exceeds safe operating levels and then resets automatically when operating conditions return to normal. To connect the MC207 to your home theater processor, inputs for both balanced and unbalanced cables are included. Three blue watt meters provide an instant measurement of power output of the front three channels (the meters may be switched off if they conflict with the television or movie screen).
The classic black glass front panel, polished stainless steel chassis, knobs and custom machined brushed aluminum end caps make the MC207 an eye pleasing addition to any room. Contact your local dealer to learn more.
-
Specifications
Electronic Specifications
-
- Power Output per Channel
- 200W @ 4 or 8 Ohms
-
- Number of Channels
- 7 (can also be used as a 2-zone amplifier with 5 channels in zone A and 2 channels in zone B)
-
- Total Harmonic Distortion
- 0.005%
-
- S/N below rated output
- 112dB
-
- Dynamic Headroom
- 1.7dB
-
- Damping Factor
- >140
-
- Rated Power Band
- 20Hz to 20kHz
-
- Frequency Response
- +0, -0.25dB from 20Hz to 20,000Hz
+0, -3dB from 10Hz to 100,000Hz
Control
-
- Remote Power Control
- Yes, 7 or 5 + 2 Channel
-
- Multi-Channel DB25 Cable
- Yes
General Specifications
-
- Circuit Configuration
- Push-Pull Complementary
-
- Circuit Design
- Transistor
-
- Mono Bridge
- No
-
- Mono Parallel
- No
-
- Autoformer
- No
-
- Meters
- Yes
-
- Meter Light Switch
- Yes
-
- Balanced Input
- Yes
-
- Front Panel
- Glass
-
- Illumination
- LED Fiber Optic
-
- Chassis Style
- Inverted
Connectivity
-
- Speaker Binding Post Type
- Yes
Weights & Dimensions
-
- Dimensions (W x H x D)
- 17-1/2" (44.5cm) x 9-7/16" (23.9cm) (including feet) x 21" (53.3cm) (including front panel and cables)
-
- Weight
- 83 lbs (37.6 kg)
-
- Shipping Weight
- 116 lbs (52.6 kg)
-
-
Downloads
Product Literature User Documents - MC207 Power Amplifier Brochure (2.56 MB)
-
Reviews & Awards
Reviews & Awards
MC207 is also part of the Westchester II Home Theater System
music system
DISCOVER MORE
More from Amplifiers
-
MC2KW
1-Channel Solid State Amplifier
- 2,000 Watt Quad Balanced Monoblock
- 3 speaker terminals for tri-wiring
- 2 Power Modules, 1 Output Module
-
MC1.25KW
1-Channel Solid State Amplifier
- 1,200 Watt Quad Balanced Monoblock
- Redesigned from top to bottom
-
MC611
1-Channel Solid State Amplifier
- 600 Watt Quad Balanced Monoblock
- 55% increase in Dynamic Headroom compared to previous model
-
MC601
1-Channel Solid State Amplifier
- 600 Watt Quad Balanced Monoblock
- High power in a compact chassis
-
MC302
2-Channel Solid State Amplifier
- 300 Watts x 2 Channels
- Great for music or home theater systems
-
MC303
3-Channel Solid State Amplifier
- 300 Watts x 3 Channels
- Designed for home theaters
- Tri-Amp capability
-
MC205
5-Channel Solid State Amplifier
- 200 Watts x 5 Channels
- Designed for home theaters
- Balanced and unbalanced inputs
-
MC8207
7-Channel Solid State Amplifier
- 200 Watts x 7 Channels
- Designed for home theaters
- LED power output indicators
Welcome to the family of McIntosh owners. This is the Warranty for your new McIntosh Home Electronic Product (the “Product”). Your Product has been designed to give many years of trouble-free performance. Nonetheless, failures do sometimes occur even with equipment as well-built as McIntosh’s. Therefore, please read this Warranty carefully, because it contains rights, as well as limitations, exclusions, and obligations, which in the event of such a failure may be very important to you. If after reading it thoroughly, you have any questions about the Warranty, please do not hesitate to write or telephone McIntosh at the address or phone number shown on the back of this warranty. Please note that this is the only Warranty which McIntosh provides for your Product, and that no one, including your dealer, has any authority to either modify or expand upon this Warranty. If your dealer has offered or made any warranties or representations concerning the Product which differ from those contained in this Warranty, they are strictly between you and the dealer, and will neither be binding upon McIntosh nor change any of the provisions in this Warranty. Please also note, that if your Product ever does require Warranty service, obtaining such service will be much easier if you have completed and returned the enclosed Warranty Registration Card. So please take a minute to fill out and return the Registration Card now, before you become too distracted by the great sounds coming from your new McIntosh Product!
USE LINK BELOW TO DOWNLOAD COMPLETE WARRANTY TERMS AND CONDITIONS.
For the protection of consumers, authorized McIntosh dealers are PROHIBITED FROM SELLING THIS PRODUCT AS NEW ONLINE OR BY MAIL OR PHONE. If you are considering purchase of this product online or by mail or phone, you risk purchasing from an unauthorized seller or receiving a used product, either of which will void the manufacturer’s warranty.
If you have any questions please contact McIntosh at (888) 979-3737 or feedback@mcintoshlabs.com.
Compare Products:
PLEASE SELECT PRODUCTS TO COMPARE
-
MC2KW
1-Channel Solid State Amplifier
-
MC1.25KW
1-Channel Solid State Amplifier
-
MC1.2KW
1-Channel Solid State Amplifier
-
MC611
1-Channel Solid State Amplifier
-
MC601
1-Channel Solid State Amplifier
-
MC301
1-Channel Solid State Amplifier
-
MC452
2-Channel Solid State Amplifier
-
MC302
2-Channel Solid State Amplifier
-
MC152
2-Channel Solid State Amplifier
-
MC2301
1-Channel Vacuum Tube Amplifier
-
MC75
1-Channel Vacuum Tube Amplifier
-
MC275
2-Channel Vacuum Tube Amplifier
-
MC303
3-Channel Solid State Amplifier
-
MC205
5-Channel Solid State Amplifier
-
MC207
7-Channel Solid State Amplifier
-
MC8207
7-Channel Solid State Amplifier