MC303 3-Channel Solid State Amplifier

300 Watts x 3 Channels
Designed for home theaters
Tri-Amp capability

Eligible for online purchase?

3 Year Limited Warranty

Add to WishlistRemove From Wishlist

Print this page

COMPARE

Ask an Expert

MC303 3-Channel Solid State Amplifier

3 Year Limited Warranty

Print this page

COMPARE

Ask an Expert

Add to WishlistRemove From Wishlist

The McIntosh MC303 is our most powerful multi-channel amplifier to date, providing 300 Watts into each of 3 channels. It features our renowned Autoformer™, which allows its full 300 Watts of power to be delivered into 2, 4 or 8 Ohm speakers with the lowest noise and distortion performance possible.

The MC303 was designed with the intent to drive a home theater’s front left, front right and center channels. As most of a movie’s soundtrack is delivered by these three channels, the powerful MC303 provides all the power needed for an amazing in-home theater experience. For surround channels, combine the MC303 with our MC312 or MC152 amplifiers and fully immerse yourself in your movie collection. For music lovers, the MC303 can be used in tri-amping configurations on compatible speakers, such as our XRT1.1K or XRT2.1K.

The MC303 shares many notable McIntosh technologies that are found in our other home audio and home theater products, including Power Guard^® that prevents over-driving of the amplifier and the resulting harsh sounding clipping that could damage your speakers. Sentry Monitor™ is our fuse-less short-circuit protection circuit that disengages the output stage before current exceeds safe operating levels and then resets automatically when operating conditions return to normal. Inputs for both balanced cables and unbalanced cables are available to provide flexibility in connecting to the rest of your system. A triple bank of blue watt meters provides instant recognition of power output (the meters may be switched off for theater use if they conflict with the television or movie screen).

Aesthetically, the MC303 is every bit as McIntosh as any of our products. A polished stainless steel chassis, classic black glass front panel, knobs and custom machined aluminum handles all come standard. Contact your local dealer to learn more.

Specifications
Electronic Specifications
- FTC Power Output Rating
  
  300 W
- Power Output per Channel
  
  300 W into 2, 4 or 8 ohms
- Number of Channels
  
  3
- Total Harmonic Distortion
  
  0.005%
- S/N below rated output
  
  112dB
- Dynamic Headroom
  
  1.8dB
- Damping Factor
  
  >40
- Rated Power Band
  
  20Hz to 20kHz
- Frequency Response
  
  +0, -0.25dB from 20Hz to 20kHz
  +0, -3dB from 10Hz to 100kHz
Control
- Remote Power Control
  
  Yes
- Multi-Channel DB25 Cable
  
  No
General Specifications
- Circuit Configuration
  
  Push-Pull Complementary Autoformers
- Circuit Design
  
  Solid State
- Mono Bridge
  
  No
- Mono Parallel
  
  No
- Output Type
  
  Autoformer™
- Meters
  
  Yes
- Meter Light Switch
  
  Yes
- Balanced Input
  
  Yes
- Front Panel
  
  Glass with handles
- Illumination
  
  LED Fiber Optic
- Chassis Style
  
  Inverted
Connectivity
- Speaker Binding Post Type
  
  Yes
Weights & Dimensions
- Unit Dimensions (W x H x D)
  
  17-3/4" (45.09cm) x 12-3/8" (31.43cm) (including feet) x 22" (55.88cm) (including front panel and cables)
- Unit Weight
  
  155 lbs (70.3 kg)
- Shipping Weight
  
  180 lbs(81.6 kg)

Downloads

Product Literature	User Documents
MC303 Power Amplifier Brochure (1.29 MB)	MC303 Power Amplifier Owner's Manual (8.58 MB) MC303 Power Amplifier Connection Diagram (1.31 MB) Important Additional Operation Information Guide - Lithium Batteries (4.91 MB)

Reviews & Awards

Reviews & Awards
MC303 Audio Review-dicembre-09 Italian (0.96 MB) MC303 Stereophile 509 (1.63 MB)

More from Power Amplifiers

MC2.1KW 1-Channel Solid State Amplifier
- 2,000 Watt Quad Balanced Monoblock
- Tri-chassis design: 2 Power Modules, 1 Output Module
- Dual sets of balanced and unbalanced inputs
- Autoformer^™, Power Guard^®, Sentry Monitor^™, Monogrammed Heatsinks^™, Solid Cinch^™ speaker binding posts
- Multiple speaker terminals for bi- and tri-wiring
MC901 1-Channel Dual Mono Amplifier
- Includes our Hybrid Drive^™ technology that uses the best of vacuum tubes and solid state to produce the best sound performance
- The ultimate solution for bi-amping loudspeakers: 300 Watt vacuum tube amplifier and 600 Watt solid state amplifier on one chassis
- Vacuum tube section powers mid and upper drivers
- Solid state section drives power hungry woofers
- DualView™ Power Output Meter
MC1.25KW 1-Channel Solid State Amplifier
- 1,200 Watt Quad Balanced Monoblock
- Redesigned from top to bottom
- Autoformer^™, Power Guard^®, Sentry Monitor^™, Monogrammed Heatsinks^™, Solid Cinch^™ speaker binding posts
MC611 1-Channel Solid State Amplifier
- 600 Watt Quad Balanced Monoblock
- 55% increase in Dynamic Headroom compared to previous model
- Autoformer^™, Power Guard^®, Sentry Monitor^™, Monogrammed Heatsinks^™, Solid Cinch^™ speaker binding posts
MC451 1-Channel Dual Mono Amplifier
- Includes our Hybrid Drive^™ technology that uses the best of vacuum tubes and solid state to produce the best sound performance
- Designed with bi-amping loudspeakers in mind
- 150 Watt vacuum tube amplifier and 300 Watt solid state amplifier on one chassis
- Vacuum tube section powers mid and upper drivers
- Solid state section drives power hungry woofers
- DualView™ Power Output Meter
MC3500 1-Channel Vacuum Tube Amplifier Mk II
- 350 Watt Monoblock
- Inspired by the original 1968-71 MC3500 – the Amplifier that Inspired a Generation
- Powered by eight EL509S high-power output vacuum tubes
- Power Guard Screen Grid Sensor™, Sentry Monitor, Solid Cinch speaker binding posts
- Machined aluminum front panel with a bead blast finish and gold anodizing
MC830 1-Channel Solid State Amplifier
- 300 Watts into 8 Ohms
- 480 Watts into 4 Ohms
- Power Guard, Sentry Monitor, Monogrammed Heatsinks, Solid Cinch speaker binding posts
MC2301 1-Channel Vacuum Tube Amplifier
- 300 Watt Quad Balanced Monoblock
- Vacuum tube powered
MC462 2-Channel Solid State Amplifier
- 450 Watts x 2 Channels
- 66% increase in Dynamic Headroom compared to previous model
- Quad Balanced Design with McIntosh Autoformers™
MC312 2-Channel Solid State Amplifier
- 300 Watts x 2 Channels
- 27% increase in Dynamic Headroom compared to previous model
- McIntosh Autoformers™
MC152 2-Channel Solid State Amplifier
- 150 Watts x 2 Channels
- Space saving 6" tall chassis
MC2152 70th Anniversary 2-Channel Vacuum Tube Amplifier
- 150 Watts x 2 Channels
- Unity Coupled Circuit Output Transformers
- (8) KT88, (4) 12AX7A and (4) 12AT7 vacuum tubes
- Striking new design with carbon fiber side panels
MC1502 2-Channel Vacuum Tube Amplifier
- 150 Watts x 2 Channels
- Unity Coupled Circuit Output Transformers
- (8) KT88, (4) 12AX7A and (4) 12AT7 vacuum tubes
MC275 2-Channel Vacuum Tube Amplifier
- 75 Watts x 2 channels or 150 Watts x 1 channel
- Unity Coupled Circuit Output Transformers
- (4) KT88, (4) 12AT7 and (3) 12AX7A vacuum tubes
- One of the most iconic amplifiers ever made by any brand
MC255 5-Channel Solid State Amplifier
- 250 Watts x 3 Channels; 200 Watts x 5 Channels
- TripleView™ Power Output Meter
- More than 100% increase in Dynamic Headroom
- Dynamic Power Manager^®; Power Guard^®
- Designed for home theaters
MC257 7-Channel Solid State Amplifier
- 250 Watts x 3 Channels; 200 Watts x 7 Channels
- TripleView™ Power Output Meter
- 94% increase in Dynamic Headroom
- Dynamic Power Manager^®; Power Guard^®
- Designed for home theaters
MC8207 7-Channel Solid State Amplifier
- 200 Watts x 7 Channels
- Designed for home theaters
- LED power output indicators
MI502 2-Channel Digital Amplifier
- Versatile audio amplifier for custom install applications
- 500 Watts into 8 Ohms
- 800 Watts into 4 Ohms
- 2U rack mountable
- Signal sensing
- Power Guard^® and Sentry Monitor^™
MI254 4-Channel Digital Amplifier
- Perfect for home theater surround sound speakers
- 250 Watts into 8 Ohms
- 300 Watts into 4 Ohms
- 2U rack mountable
- Can also be used in distributed audio
- Bussable inputs
- Signal sensing
- Power Guard^® and Sentry Monitor^™
MI347 7-Channel Digital Amplifier
- Designed for home theaters
- 3 Front Channels: 250 Watts into 8 Ohms or 300 Watts into 4 Ohms
- 4 Surround Channels: 125 Watts into 8 Ohms or 200 Watts into 4 Ohms
- 3U rack mountable
- Power Guard^® and Sentry Monitor^™
MI128 8-Channel Digital Amplifier
- Ideal for multi-zone distributed audio
- 120 Watts into 8 Ohms
- 150 Watts into 4 Ohms
- 2U rack mountable
- Channel summing circuits for mono signal distribution
- Volume controls for each channel
- Bussable inputs
- Signal sensing
- Power Guard^® and Sentry Monitor^™
MI1250 12-Channel Digital Amplifier
- Ideal for multi-zone distributed audio
- 50 Watts into 8 Ohms
- 90 Watts into 4 Ohms
- 2U rack mountable
- Channel summing circuits for mono signal distribution
- Volume controls for each channel
- Bussable inputs
- Signal sensing
- Power Guard^® and Sentry Monitor^™
MHA200 2-Channel Vacuum Tube Headphone Amplifier
- Compact footprint: just 6-1/8" (15.6cm) x 9-1/8" (23.2cm)
- 4 selectable headphone impedance ranges
- Balanced and unbalanced analog inputs
- Balanced stereo or dedicated Left & Right outputs
MHA50 Portable Decoding Amplifier
- Smartphone sized headphone amplifier with DAC
- Digital inputs for iOS, Android and PC/Mac
- Bluetooth input
- Supports PCM to 192kHz, DSD128, aptX
MC2KW 1-Channel Solid State Amplifier
- 2,000 Watt Quad Balanced Monoblock
- 3 speaker terminals for tri-wiring
- 2 Power Modules, 1 Output Module